主要技术参数 Main Specifications |
单位 unit |
GL-KXM3016/LD |
GL-KXM4016/LD |
GL-KXM6016/LD |
工作台台面尺寸(长×宽) Area of Worktable(L×W) |
mm |
3000×1600 |
4000×1600 |
6000×1600 |
两床身之间距离 Distance between bed |
mm |
33500 |
工作台T形槽(槽数×宽度) Table T-slot (slot number×width) |
|
7×28 |
工作台最大承重量 Max. allowable weight of table |
kg/m2 |
10000 |
最大磨削工件尺寸(长×宽×高) The Max Grinding Dimension |
mm |
3000×1600×800 |
4000×1600×800 |
6000×1600×800 |
纵向移动行程 Longitudinal movement stroke |
mm |
3100 |
4100 |
6100 |
横向移动行程 Lateral movement stroke |
mm |
1800 |
纵向移动速度(无级调速) Longitudinal movement speed (stepless) |
m/min |
1-23 |
横向移动速度 Lateral movement speed |
mm/min |
50-2400 |
横向断续进给量 rransverse intermittent feed |
mm/次 |
1-35(任意) |
磨头电机功率 Grinding motor power |
KW |
15 |
磨头主轴中心线到台面的距离 Distance from grinding spindle center to table |
mm |
最大1050最小200 |
砂轮尺寸(外径×宽度×内径) Wheel size (diameter×width×diameter) |
mm |
Φ500×75×Φ203 |
垂直最小进给量 Minimum vertical feed |
mm |
0.005 |
纵向移动行程 Longitudinal movement stroke |
mm |
3100 |
4100 |
6100 |
横向移动行程 Lateral movement stroke |
mm |
1850 |
铣头主轴端面到台面的距离 Distance spindle nose to the table |
mm |
最大850最小90 |
铣头主轴电机功率 Spindle motor power |
kW |
11 |
铣头主轴转速 Spindle speed |
r/min |
3000 |
铣头主轴锥孔锥度 laper spindle taper |
|
B.T.50 |
横向移动速度 Longitudinal movement speed |
mm/min |
50-5000 |
纵向移动速度 Lateral movement speed |
mm/min |
50-10000 |
工件等厚度 Thickness of the workpiece |
mm |
磨:0.015/1000 铣:0.03/2000 |
表面粗糙度 Surface rouahness |
µm |
磨:≤Ra0.63 |
机床外形尺寸(长×宽×高) Overall Dimesions of the Machine(about) |
mm |
约6500×5500×4200 |
约8500×5500×4200 |
约10500×5500×4200 |
机床净重 Net weight |
Kg |
约27000 |
约30000 |
约33000 |
电机总功率 rotal motor power |
KW |
约55 |